Printing Plu/Message Information - ISHIDA Rice Lake Weighing Systems BC-3000 Operating Manual

5.10 Printing PLU/Message Information

Stored information can be printed on labels or receipt paper. The following steps indicate how this is done.
Step
• Access the Programming mode.
1
Ex. Password = 9000
Note: To exit the Programming mode, press the
MODE key again.
• Enter "9" followed by the ENTER key, or press
2
the PLU LIST key to select the Printing mode.
• To print all of the stored information, press
3
the PRINT key. Otherwise skip this step.
•• labels for checking PLU barcodes will be
issued when the label is set, or
•• programmed PLU information and extra
messages will be printed when the receipt
paper is set.
Note: To stop printing, press the PRINT key.
To continue printing, press the PRINT
key again.
• Proceed to step 9.
• Press the ENTER key, and select the type of
4
list using the RIGHT or LEFT key.
0 = PLUs
1 = Messages (when receipt paper is set)
Ex. Messages
• Press the ENTER key.
4
• Enter the star t number of the range to be
5
listed followed by the ENTER key.
Ex. Start No. = 5
• Press the ENTER key.
4
• Enter the end number of the range to be
6
listed followed by the ENTER key.
Ex. End No. = 10
• Press the ENTER key.
page 54
Description Keys and Display
9 0 0 0
9
OR
ENTER
PRINT
ENTER
OR
ENTER
5
ENTER
ENTER
1 0
ENTER
ENTER
BC-3000 • User's Manual • Rev 0
MODE
PLU
LIST