Pptp Encapsulation - ZyXEL Communications ZyXEL Prestige P-330W User Manual

Table 35 PPPoE Encapsulation
LABEL
Set DNS
Manually
DNS 1 - 3
Clone MAC
Address
Respond to WAN
Ping
Enable UPnP
IPSec
Passthrough
PPTP
Passthrough
L2TP
Passthrough
Save
Reset

6.7.4 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of
data from a remote client to a private server, creating a Virtual Private Network (VPN) using
TCP/IP-based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over public
networks, such as the Internet.
The screen shown next is for PPTP encapsulation.
Chapter 6 Advanced Options
DESCRIPTION
Use this if your ISP does not assign a DNSP server when it assigns you an IP
address.
Enter in your ISP's DNS server IP address here. You must enter in 1.
Your ISP may require a particular MAC address in order for you to connect to the
Internet. This MAC address is the PC's MAC address that your ISP had originally
connected your Internet connection to. Type in this Clone MAC address in this
section to replace the WAN MAC address with the MAC address of that PC.
Put a check in this box to reply to ping packets.
UPnP (Universal Plug and Play) allows automatic discovery and configuration of the
Wireless Router. UPnP is by supported by Windows ME, XP, or later. Put a check
in this box to allow the router configuration to be changed by UPnP devices.
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make PPTP VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
ZyXEL P-330W User's Guide
82