3 For dynamically assigned settings, select Using DHCP from the Configure list.
Figure 82 Macintosh OS X: Network
4 For statically assigned settings, do the following:
5 Click Apply Now and close the window.
6 Turn on your P-330W and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Appendix C Setting up Your Computer's IP Address
•
Select Built-in Ethernet from the Show list.
•
Click the TCP/IP tab.
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your P-330W in the Router address box.
ZyXEL P-330W User's Guide
116