Appendix A Product Specifications And Wall-Mounting Instructions; Table 100 Hardware Features; Table 101 Firmware Features - ZyXEL Communications ZyXEL NBG334W User Manual

A
P P E N D I X
Product Specifications and Wall-
The following tables summarize the NBG334W's hardware and firmware features.

Table 100 Hardware Features

Dimensions (W x D x H)
Weight
Power Specification
Ethernet ports
4-5 Port Switch
LEDs
Reset Button
Antenna
Operation Environment
Storage Environment
Distance between the
centers of the holes on
the device's back.
Screw size for wall-
mounting

Table 101 Firmware Features

FEATURE
Default IP Address
Default Subnet Mask
NBG334W User's Guide
Mounting Instructions
162 x 115 x 33 mm
237g
Input: 120~240 AC, 50~60 Hz
Output: 12 V AC 1 A
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
A combination of switch and router makes your NBG334W a cost-effective
and viable network solution. You can add up to four computers to the
NBG334W without the cost of a hub when connecting to the Internet
through the WAN port. You can add up to five computers to the NBG334W
when you connect to the Internet in AP mode. Add more than four
computers to your LAN by using a hub.
PWR, LAN1-4, WAN, WLAN, WPS
The reset button is built into the rear panel. Use this button to restore the
NBG334W to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
The NBG334W is equipped with a 2dBi detachable antenna to provide clear
radio transmission and reception on the wireless network.
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 85% RH (Non-condensing)
Temperature: -20º C ~ 60º C
Humidity: 20% ~ 90% RH (Non-condensing)
125 mm
M3*10
DESCRIPTION
192.168.1.1
255.255.255.0 (24 bits)
A
229