Network Address Translation (Nat); Nat Overview; Using Nat; Port Forwarding: Services And Port Numbers - ZyXEL Communications ZyXEL NBG334W User Manual

C
H A P T E R
Network Address Translation
This chapter discusses how to configure NAT on the NBG334W.

11.1 NAT Overview

NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a
host in a packet. For example, the source address of an outgoing packet, used within one
network is changed to a different IP address known within another network.

11.2 Using NAT

You must create a firewall rule in addition to setting up NAT, to allow traffic
from the WAN to be forwarded through the NBG334W.

11.2.1 Port Forwarding: Services and Port Numbers

A port forwarding set is a list of inside (behind NAT on the LAN) servers, for example, web or
FTP, that you can make accessible to the outside world even though NAT makes your whole
inside network appear as a single machine to the outside world.
Use the Application screen to forward incoming service requests to the server(s) on your local
network. You may enter a single port number or a range of port numbers to be forwarded, and
the local IP address of the desired server. The port number identifies a service; for example,
web service is on port 80 and FTP on port 21. In some cases, such as for unknown services or
where one server can support more than one service (for example both FTP and web service),
it might be better to specify a range of port numbers.
In addition to the servers for specified services, NAT supports a default server. A service
request that does not have a server explicitly designated for it is forwarded to the default
server. If the default is not defined, the service request is simply discarded.
NBG334W User's Guide
11
(NAT)
129