Figure 89 Management > Bandwidth Mgmt > Advanced; Table 67 Management > Bandwidth Mgmt > Advanced - ZyXEL Communications ZyXEL NBG334W User Manual

Chapter 16 Bandwidth Management
Figure 89 Management > Bandwidth MGMT > Advanced
The following table describes the labels in this screen.
Table 67 Management > Bandwidth MGMT > Advanced
LABEL
Check my
upstream
bandwidth
Upstream
Bandwidth (kbps)
Application List
#
Enable
Service
Priority
Advanced Setting
User-defined
Service
#
166
DESCRIPTION
Click the Detection button to check the size of your upstream bandwidth.
Enter the amount of bandwidth in kbps (2 to 100,000) that you want to allocate for
traffic. 20 kbps to 20,000 kbps is recommended.
The recommendation is to set this speed to be equal to or less than the speed of
the broadband device connected to the WAN port. For example, set the speed to
1000 Kbps (or less) if the broadband device connected to the WAN port has an
upstream speed of 1000 Kbps.
Use this table to allocate specific amounts of bandwidth based on the pre-defined
service.
This is the number of an individual bandwidth management rule.
Select this check box to have the NBG334W apply this bandwidth management
rule.
This is the name of the service.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen where you can modify
the rule.
Use this table to allocate specific amounts of bandwidth to specific applications
and/or subnets.
This is the number of an individual bandwidth management rule.
NBG334W User's Guide