Ford Tourneo Connect Owner's Handbook Manual page 71

Continuous heater operation
B
E71350
WARNING
The heater will continue to operate
after the ignition is switched off.
Switch the heater off to avoid
unnecessary heating.
Press and hold button B. Press button C.
The heater will now operate until button
C is pressed again. The display will light
up and show the clock time and the
heating symbol.
Programmable heating mode
The heater will come on automatically at
the activated pre-set start time, and will
stay on for the programmed duration. The
display will light up and show the
remaining heating duration and the
heating symbol.
You can program up to three different
pre-set start times.
Climate control
Programming the pre-set heating
start times
C
E71351
Press button A repeatedly, until the
symbol (1, 2 or 3) for the desired pre-set
time is displayed. Press buttons B and D
to set the time. To adjust the time rapidly,
press and hold the respective button.
After programming the pre-set start times
press button A. The display will show the
clock time with the colon flashing.
Activating and deactivating pre-set
start times
E71352
69
A
D
A
B
C