Ford Tourneo Connect Owner's Handbook Manual page 139

3. Select the ACTIVE PHONE option
on the audio unit.
4. Scroll through the different stored
phones by using the seek buttons to
display the bonded phones.
5. Press the MENU button to select the
phone which is to be the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the DEBOND option on the
audio unit.
4. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
5. Press the MENU button to select the
phone which is to be debonded.
USING THE TELEPHONE -
VEHICLES WITH:
NAVIGATION SYSTEM
This chapter describes the phone
functions of the Navigation System.
Note: Refer to your Navigation System
guide for details of the controls.
An active phone must be present.
Even if connected to the Navigation
System, your phone can still be used in
the usual way.
Making a call
Dialling a number
Phone numbers can be dialled using voice
control. See Voice control (page 139).
Telephone
Ending a call
Calls can be ended by pressing either the
END button, the MODE button on the
remote switch or the ON/OFF button on
the navigation system.
Redialling a number
1. Press the PHONE button on the unit.
2. Select REDIAL.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by
pressing either the call accept button, the
MODE button on the remote control, the
PHONE button on the unit or by using
the ACCEPT option in the menu.
Rejecting an incoming call
Incoming calls can be rejected by
pressing either the call reject button, the
CD or AM/FM buttons on the unit, or by
using the REJECT option in the menu.
Receiving a second incoming
call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call, whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by pressing either the call accept button,
the MODE button on the remote control,
the PHONE button on the unit or by
using the ACCEPT option in the menu.
Note: This will cancel the ongoing call.
137