Ford Tourneo Connect Owner's Handbook Manual page 123

5. Remove the wheel nuts and the
wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical specifications (page 123).
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer
for more details regarding compatibility.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: The wheel nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
Wheels and tyres
E75442
4. Partially tighten the wheel nuts in the
5. Lower the vehicle and remove the
6. Fully tighten the wheel nuts in the
7. Install the wheel trim using the ball of
Note: If the spare wheel is different in size
or construction to the road wheels, have
this replaced as soon as possible.
Stowing the wheel
if lowered without a wheel attached.
121
1
3
5
sequence shown.
jack.
sequence shown.
your hand.
WARNING
Have the wheel nuts checked for
tightness and the tyre pressure
checked as soon as possible.
CAUTION
Do not raise the spare wheel carrier
without the wheel attached. Damage
can occur to the winch mechanism
4
2