Ford Tourneo Connect Owner's Handbook Manual page 25

E74386
1. Insert a screwdriver into the recess on
the back of the key and remove the
key blade.
2. Release the retaining clips with the
screwdriver and separate the two
halves of the remote control.
CAUTION
Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
3. Carefully prise out the battery with the
screwdriver.
4. Install a new battery (3V CR 2032) with
the + facing upwards.
5. Assemble the two halves of the
remote control.
6. Install the key blade.
Keys and remote controls
23