Ford Tourneo Connect Owner's Handbook Manual page 138

3. Select the CALL OUT list or the
CALL IN list. On some audio units,
select the MISSED, INCOMING or
OUTGOING calls list.
Note: If the active phone does not
provide a call out list, the last outgoing call
number/entry can be redialled.
4. Press the seek button on the audio
unit.
5. Press the PHONE or the call accept
button to dial the desired phone
number.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by
pressing either the call accept button, the
PHONE button or the MODE button on
the remote control.
Rejecting an incoming call
Incoming calls can be rejected by
pressing the call reject button.
Audio units without a telephone keypad
can also reject a call by pressing either
PHONE, CD, AM/FM or ON/OFF.
Receiving a second incoming
call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by pressing either the call accept button,
the PHONE button, or the MODE button
on the remote control.
Telephone
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing the call reject button. Units
without a telephone keypad can also
reject a second incoming call by pressing
the CD button, or the AM/FM button.
Muting the microphone
During a call, it is possible to mute the
microphone. Whilst muted, confirmation
will appear in the display.
Audio units with green call accept
button
Press the call accept button. Press the
button once again to turn this function off.
Audio units without green call
accept button
Press the seek up or down button. Press
the button once again to turn this function
off.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Using the station storage button
Note: This process is only for audio units
without a telephone keypad.
1. Press the PHONE button on the
audio unit.
2. Press the preset number required
(using the station preset buttons 1 -
6).
Using the audio unit menu
Note: After bonding a phone to the
system, this becomes the active phone.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
136