ISOFIX ANCHOR POINTS
Tourneo Connect
E68945
WARNING
Use only ISOFIX child seats we
recommend.
You can fit ISOFIX child restraints using
the ISOFIX anchor points.
The ISOFIX system comprises of two rigid
attachment arms on the child restraint
that attach to anchor points on the rear
seats, where the cushion and backrest
meet. Tether anchor points may also be
fitted.
Attaching a child restraint with a top
tether
WARNINGS
Use an anti-rotation device when
using the ISOFIX system. We
recommend that you use a top
tether or a support leg.
For ISOFIX child seats fitted with a
top tether, always use a top tether
anchor point.
Child safety
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Always use the top tether anchor
point at the base of the second row
seatback when the third row is
occupied.
1. Remove the head restraint. See
Head restraints (page 74).
E75771
2. Route the tether strap to the anchor
point.
3. Push the child seat back firmly to
engage the ISOFIX lower anchor
points.
4. Tighten the tether strap in line with the
child seat manufacturer's instructions.
CHILD SAFETY LOCKS
Tourneo Connect
You cannot open the doors from
inside if you have put the child safety
locks on.
15
WARNINGS
WARNING