Table of Contents
Advertisement
Communications
4.3 Ethernet
The miniIPS2e is fitted with a Transmission Control Protocol/Internet Protocol (TCP/IP) Ethernet module set
up in Dynamic Host Configuration Protocol (DHCP). This means the instrument will automatically be
assigned a IP address. Depending on how your router works, it should go back to that IP address each time
it is interfaced although this is not guaranteed unless you provide it with a fixed IP in the router
configuration.
4.3.1 Setting up Ethernet Connectivity
The miniIPS2e has a Lantronix Ethernet module that will need to be configured. You can download the
Lantronix Device Installer software from here.
Connect the miniIPS2e to the network and run the software. If the device is not found after a few
moments press Search, top left
Once the module has been found click on XPort to reveal the IP address - in the example above:
192.168.8.155
Click on the IP Address in the left hand panel to reveal more information in the right hand panel
Select Web Configuration
Select the green arrow to reveal the password entry dialogue
Do not enter a Username or Password - simply select OK
© 2020 – Valeport Ltd
Page | 6
Advertisement
Table of Contents
