Table of Contents
Advertisement
Setup Using Valeport Configure App
9 Setup Using Valeport Configure App
9.1 Interface the instrument
Connect the uvSVX to a suitable comm port and power.
Use the drop-down lists to select your port, baud rate and Instrument SetUp file as required.
Click on the
9.1.1 Valeport Configure Without an Instrument
If you do not have an instrument to hand or would like to setup a configuration file to load into another
instrument or in preparation for a future deployment select the tick box on the opening dialogue
This will give you access to all the configuration options and allow you to store the SetUp file for later
upload.
Once you have prepared the SetUp configuration use the File menu to store the configuration Profile.
© 2020 – Valeport Ltd
button
Page | 32
Advertisement
Table of Contents
