Setting Up the mniIPS2
5.10 Information #Codes
The following commands will cause the sensor to report back various pieces of information, as described:
# Code
#004
#006
#008
#010
#012
#014
#015
#019
#021
#023
#030
#032
#034
#038
#045
#093
#136
#138
#200
#202
#210
#701
#703
© 2020 – Valeport Ltd
Description
Read the sampling rate
Read the address mode status
Read Tare activation status
Read Tare value
Read operating mode
Read data string output format
Read the last measured observation
Read calibrated units
Read unit status
Read user calibration coefficients
Read number of samples for burst averaging
Read firmware version number
Read instrument serial number
Read User calibration activation status
Reads the Pressure Module serial number
Read PCB serial number
Read the set Latitude
Read Pressure module calibration date
Read Pressure sensor serial number
Read maximum transducer pressure range
Read startup message status - on/off
Reads Modbus activation status
Reads Modbus address
Page | 18