Set Communication - ADF Web HD67B77-A1 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section define the fundamental communication parameters of two buses,
PROFINET and SNMP.
By Pressing the "Set Communication" button from the main window for SW67B77
(Fig. 2) the window "Set Communication" appears (Fig. 3).
The means of the fields for "PROFINET Master" are:
In the fields "IP Address" the IP address for PROFINET side of the converter is
defined;
In the fields "SubNet
converter is defined;
In the fields "Gateway" the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field "Name of Station" the name of the PROFINET node is defined.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Mask" the SubNet Mask for PROFINET side of the
User Manual PROFINET Master / SNMP Agent
Document code: MN67B77_ENG Revision 1.000
Figure 3: "Set Communication" window
INFO: www.adfweb.com
Page 15 of 27
Phone +39.0438.30.91.31