Table of Contents
Advertisement
Prestige 153/153X WAN Bridge/Routers
The following table describes the SNMP configuration parameters.
Table 10-1.
SNMP Configuration Menu Fields
Field
Description
Get Community
Enter the Get Community, which is the password for the incoming Get-
and GetNext- requests from the management station.
Set Community
Enter the set community, which is the password for incoming Set-
requests from the management station.
If you enter a trusted host, your Prestige will only respond to SNMP
Trusted Host
messages from this address. If you leave the field blank (default), your
Prestige will respond to all SNMP messages it receives, regardless of
source.
Trap:
Enter the trap community, which is the password sent with each trap to
Community
the SNMP manager.
Trap:
Enter the IP address of the station to send your SNMP traps to.
Destination
Once you have completed filling in Menu 22 - SNMP Configuration, press [Enter] at the message [Press
ENTER to Confirm...] to save your configuration, or press [Esc] to cancel.
10-2
Default
public
Public
Blank
public
blank
SNMP Configuration
Advertisement
Table of Contents
