SMC Networks VQZ100 Series Manual page 6

VQZ100/200/300
Series
Semi-standard Specifications
High speed response type
High pressure type (Metal seal type only)
External pilot type ∗
∗ For details on external pilot type, refer to page 1806.
Made to Order
(For details, refer to page 1825.)
Symbol Description
X30
Pilot valve common exhaust
X90
Main valve fluororubber
X113
All fluororubber
Flow Characteristics
Valve
Series construc-
tion
VQZ100
N.C. valve Poppet
Metal seal
N.C.
valve
Rubber seal
VQZ200
Metal seal
N.O.
valve
Rubber seal
Metal seal
N.C.
valve
Rubber seal
VQZ300
Metal seal
N.O.
valve
Rubber seal
Note 1) Based on JIS B 8374-1981 (Supply pressure: 0.5 MPa; with light/surge voltage suppressor: clean air)
Response time values will change depending on pressure and air quality.
Note 2) Weight for threaded connection
1794
A
Specifications
Valve construction
Fluid
Max. operating pressure (MPa)
Min. operating pressure (MPa)
Ambient and fluid temperature (°C)
Max. operating frequency (Hz)
Pilot exhaust method
Lubrication
Manual override
Mounting orientation
Impact/Vibration resistance (m/s
Enclosure ∗
∗ Based on IEC60529
Note 1) When using body ported type as a single unit, the individual exhaust is used.
Note 2) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at
Vibration resistance: No malfunction occurred in one sweep test between 45 and 2000 Hz. Test was performed
Note 3) When IP65 compliant DIN terminals are selected: VQZ 2-YW1-
Solenoid Specifications
Electrical entry
Coil rated voltage
(V)
Allowable voltage fluctuation
Power
consumption (W)
Apparent power
(VA) ∗
Surge voltage suppressor
Indicator light
∗ In common between 110 VAC and 115 VAC, and between 220 VAC and 230 VAC.
∗ For 115 VAC and 230 VAC, the allowable voltage is –15% to +5% of rated voltage.
1 → 2 (P → A)
Model
C [dm /(sbar)]
3
VQZ115
0.59
VQZ212
1.2
VQZ232
1.6
VQZ222
1.2
VQZ242
1.6
VQZ312
2.7
VQZ332
3.5
VQZ322
2.6
VQZ342
3.5
Metal seal
0.7 (High pressure type: 1.0)
0.1
20
) Note 2)
2
the right angles to the main valve and armature in both energized and de-energized states
every once for each condition. (Value in the initial state)
to axis and right angle directions of the main valve and armature when pilot signal is ON
and OFF. (Value in the initial state)
DC
AC 50/60 Hz
Standard
High speed
DC
response,
high pressure
100 V
110 V
[115 V]
AC
200 V
220 V
[230 V]
Flow characteristics
2 → 3 (A → R)
b Cv C [dm /(sbar)]
3
0.44 0.17 0.56 0.30
0.21 0.30 1.3 0.24
0.33 0.39 1.7 0.37
0.25 0.31 1.3 0.20
0.36 0.40 1.7 0.36
0.18 0.62 2.4 0.28
0.34 0.87 3.0 0.33
0.21 0.59 2.2 0.16
0.38 0.88 2.9 0.27
Rubber seal
Air, Inert gas
0.7
0.15
–10 to 50 (No freezing)
5
Individual exhaust
Not required
Push type, Locking type (Tool required)
Free
150/30
Dustproof (DIN terminal: IP65
2
3
Grommet (G) M-type plug connector (M)
L-type plug connector (L) DIN terminal (Y)
G, L, M
24, 12
100, 110, 200, 220 ∗
±10% of rated voltage ∗
0.35 [(With light: 0.4 (DIN terminal with light: 0.45)]
0.9 [(With light: 0.95 (DIN terminal with light: 1.0)]
0.78 (With light: 0.81)
0.86 (With light: 0.89)
[0.94 (With light: 0.97)]
1.18 (With light: 1.22)
1.30 (With light: 1.34)
[1.42 (With light: 1.46)]
Varistor
LED (Neon light when AC with DIN terminal)
Response time (ms)
High
High
Standard:
speed
pressure:
0.35 W
response:
0.9 W
b Cv
0.9 W
10 or less — 13 or less
0.14
22 or less 14 or less 18 or less
0.33
22 or less 15 or less
0.45
22 or less 14 or less 18 or less
0.31
22 or less 15 or less
0.45
22 or less 17 or less 22 or less
0.56
33 or less 25 or less
0.72
22 or less 17 or less 22 or less
0.49
33 or less 25 or less
0.69
VQZ100 (Poppet seal)
0.7 (High pressure type: 1.0)
0.15
20
Common exhaust
Note 1)
Note 3) )
Y
0.78 (With light: 0.87)
0.86 (With light: 0.87)
[0.94 (With light: 1.07)]
1.15 (With light: 1.30)
1.27 (With light: 1.46)
[1.39 (With light: 1.60)]
Note 1)
Note 2)
Weight
AC
(g)
22 or less 24
34 or less
— 36 or less
57
34 or less
—
36 or less
34 or less
— 57 or less
93
34 or less
— 57 or less