I
4
INSTALLAZIONE
ATTENZIONE: importanti istruzioni di
sicurezza. Seguire tutte le istruzioni in
quanto una non corretta installazione può
causare danni gravi alle persone.
Prima di effettuare l'installazione si
raccomanda di leggere attentamente le
prescrizioni e le avvertenze contenute nel
presente
manuale
(vedere
PRESCRIZIONI E AVVERTENZE DI
SICUREZZA)
ed
scrupolosamente alle istruzioni in esso
riportate.
4.1
PRESCRIZIONI E
AVVERTENZE PER
L'INSTALLAZIONE
Prima di procedere con l'installazione
leggere attentamente quanto riportato
nel
cap.
PRESCRIZIONI
AVVERTENZE DI SICUREZZA.
E' compito
dell'INSTALLATORE
PROFESSIONALE fare un'analisi dei
rischi e adeguare di conseguenza i
dispositivi
di
dell'automazione.
Prima di iniziare l'installazione
verificare l'eventuale necessità
d'ulteriori dispositivi e materiali che
possono
servire
a
l'automazione in base alla specifica
situazione d'impiego.
L'installatore deve controllare che il
range di temperatura dichiarato sulla
centrale (vedi cap. DATI TECNICI) sia
adatto al luogo d'installazione.
L'automazione non può essere
utilizzata su cancelli dotati di porta per
passaggio pedonale, a meno che il
funzionamento dell'automazione sia
impedito con la porta aperta.
Prima di installare l'automazione
assicurarsi che il cancello sia in buone
condizioni meccaniche, correttamente
bilanciato e che si apra e chiuda in
maniera corretta.
Assicurarsi che sia evitato il pericolo
d'intrappolamento tra il cancello
aperto e le parti circostanti, in seguito
al movimento d'apertura.
Eventuali pulsanti (normalmente
aperti/off) installati per il comando
dell'automazione devono essere
posizionati in modo tale che il cancello
sia a vista, ma distanti dalle parti in
movimento. Tali comandi, a meno che
non funzionino mediante chiave,
devono essere posizionati ad una
altezza minima di 1,5 m e non essere
accessibili al pubblico.
Dopo aver installato l'automazione,
assicurarsi
che
sia
correttamente e che i sistemi di
protezione e lo sblocco funzionino
correttamente.
4
INSTALLATION
ATTENTION: Important safety instructions.
Follow all instructions carefully, incorrect
installation may cause serious injury.
Before commencing installation we highly
recommend reading the instructions and
warnings contained in this manual
carefully (see the SAFETY INSTRUCTIONS
cap.
AND WARNINGS Chap) and observing the
instructions it contains.
attenersi
4.1
INSTRUCTIONS AND
WARNINGS FOR
INSTALLATION
Before commencing installation read
the SAFETY INSTRUCTIONS AND
WARNINGS chapter carefully.
The PROFESSIONAL FITTER who
installs the control unit is responsible
E
for performing risk analysis and
regulating the automation's safety
devices consequentially.
Before commencing installation, check
whether further devices or materials
sicurezza
are needed to complete the automation
in order to suit the specific situation
in which it will be used.
The Fitter must check that the
temperature range declared on the
completare
operator (see Technical Data Chap.) is
suited to the place in which the device
is installed.
The operator cannot be fitted on gates
with separate pedestrian access,
unless operator function is prevented
when the door is open.
Before installing the operator, ensure
that the gate is in good mechanical
conditions, correctly balanced and that
it opens and closes correctly.
Ensure that there is no risk of
entrapment between the open gate and
surrounding parts following the
opening movement.
Any normally open/off buttons installed
for the activation of the operator must
be positioned so that they are within
view of the gate but distant from
moving parts. Unless said commands
operate using keys, they must be
positioned at a minimum height of
1.5m
and
unauthorised persons.
Once the automation has been
installed, ensure that it is correctly
adjusted and that the protection
systems and release work properly.
regolata
GB
4
ACHTUNG: wichtiger hinweis. Befolgen sie
die
installation schwere verletzungen an
personen verursachen kann.
Es wird empfohlen vor der Installation die
in
enthaltenen Vorschriften und Hinweise
(siehe Kap. SICHERHEITSVORSCHRIFTEN
UND
durchzulesen und sich bei der Installation
streng
Anweisungen zu halten.
4.1
not
accessible
to
D
INSTALLATION
anleitungen,
da
eine
dem
vorliegenden
Handbuch
–HINWEISE)
aufmerksam
an
die
hier
angeführten
INSTALLATIONS-
VORSCHRIFTEN UND -
HINWEISE
Bevor mit der Installation begonnen
wird,
ist
das
SICHERHEITSVORSCHRIFTEN UND –
HINWEISE aufmerksam durchzulesen.
Der Fachinstallateur hat die Aufgabe,
alle Risiken zu analysieren und folglich
die Sicherheitsvorrichtungen des
Antriebs anzupassen.
Bevor mit der Installation begonnen
wird, ist zu überprüfen, ob weitere
Vorrichtungen
und
Materialien
notwendig sind, um den Antrieb auf die
bestimmte Verwendungssituation
abzustimmen.
Der
Installateur
hat
vergewissern,
dass
Installationsumgebung dem für den
Betrieb der Steuerung vorgesehenen
Temperaturbereich
(siehe
Technische Daten) entspricht.
Die Steuerung darf nicht bei einem Tor
mit eingebauter Tür für Fußgänger
angewendet werden, außer wenn der
Betrieb des Antriebs bei geöffneter Tür
gesperrt ist.
Bevor der Antrieb installiert wird, ist
zu überprüfen, ob das Tor in gutem
mechanischem Zustand und richtig
ausgerichtet ist und ob sich das Tor
optimal öffnen und schließen lässt.
Vergewissern Sie sich, dass bei der
Toröffnung keine Quetschgefahr
zwischen
dem
Tor
und
umliegenden Bereichen gegeben ist.
Etwaige, für den Betrieb des Antriebs
installierte Tasten (normal geöffnet/off)
sind so zu positionieren, dass das Tor
in Sichtweite, jedoch in sicherer
Entfernung von den beweglichen
Teilen ist. Diese Bedienungseinheiten
sind außer bei Betrieb mit einem
Schlüssel in einer Mindesthöhe von 1,5
m und an einem für die Öffentlichkeit
nicht
zugänglichen
positionieren.
Nachdem der Antrieb installiert wurde,
ist zu überprüfen, ob dieser korrekt
eingestellt
ist
und
Sicherheitsvorrichtunegen und die
Notentriegelung richtig funktionieren.
falsche
Kap.
sich
zu
die
Kap.
den
Ort
zu
ob
die
11
Need help?
Do you have a question about the GENIUS GE 224 and is the answer not in the manual?