6.12 Assembling the belt eyelet
The chain saw is fitted with two eyes at the rear
edge of the chain saw housing, a rope eye and a
belt attachment eye. The belt attachment eye is not
fitted on delivery.
1
Loosen the screw that holds the rope eye in place.
See Figure 35.
2
Fit the belt attachment eye in its mounting as
outlined in Figure 36. Insert the screw through both
eyes and tighten. Tightening torque of 2-4 Nm.
3
Note! It is important that the rope eye is fitted cor-
rectly. See Figure 37 on how to fit the rope eye.
Fig 35
Fig 36
Fig 37
Safety equipment
27
English –