Husqvarna T540 XP Workshop Manual page 41

Dismantling the carburettor
1
Dismantle the air filter and air filter cover.
2
Loosen suction hose (K) and bleeding hose (L)
from their respective attachments in the filter
holder. Then unscrew the screws and lift out the
filter holder. See Figure 41.
3
Remove the AutoTune service connector from its
attachment on the back of the filter holder
(T540 XP). See Figure 42
See figure 42B regarding T540 XP II.
4
Use a small flat screwdriver to unsnap the
connector. Then loosen the suction hose (K), the
throttle cable (M) and the fuel hose (N) from the
carburettor. Unhook the link arm (P) from the air
valve. See Figure 43.
L
Fig 41
T540 XP
Fig 42
T540 XP II
Fig 42B
Fig 43
Repair instructions
41
English –