Figure 185 Invalid Parameter Entered: Command Line Example; Figure 186 Valid Parameter Entered: Command Line Example; Internal Sptgen Ftp Download Example - ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual

Appendix C Internal SPTGEN
DO NOT alter or delete any field except parameters in the Input column.
This appendix introduces Internal SPTGEN. All menus shown in this appendix are example
menus meant to show SPTGEN usage. Actual menus for your product may differ.
Internal SPTGEN File Modification - Important Points to Remember
Each parameter you enter must be preceded by one "="sign and one space.
Some parameters are dependent on others. For example, if you disable the Configured field in
menu 1 (see
If you enter a parameter that is invalid in the Input column, the P-660HWP-Dx will not save
the configuration and the command line will display the Field Identification Number.
185 on page
value other than "0" or "1" in the Input column of Field Identification Number 1000000
(refer to Figure 184 on page

Figure 185 Invalid Parameter Entered: Command Line Example

field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
The P-660HWP-Dx will display the following if you enter parameter(s) that are valid.

Figure 186 Valid Parameter Entered: Command Line Example

Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

Internal SPTGEN FTP Download Example

1 Launch your FTP application.
2 Enter "
3 Get "
computer. The name "
4 Edit the "
this FTP screen to edit.
36
Figure 184 on page 35), then you disable every field in this menu.
36, shown next, is an example of what the P-660HWP-Dx displays if you enter a
35).
". The command "
bin bin
" file. The command "
rom-t
" is the configuration filename on the P-660HWP-Dx.
rom-t
" file using a text editor (do not use a word processor). You must leave
rom-t
" sets the transfer mode to binary.
" transfers files from the P-660HWP-Dx to your
get
Figure
P-660HWP-Dx User's Guide