Back To Factory Defaults; Restart; Figure 171 Temporarily Disconnected; Figure 172 Configuration Restore Error - ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual

Figure 171 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default P-660HWP-Dx IP address
(192.168.1.1). See the appendix for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 172 Configuration Restore Error

21.2.3 Back to Factory Defaults

Pressing the RESET button in this section clears all user-entered configuration information
and returns the P-660HWP-Dx to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your P-
660HWP-Dx. Refer to the chapter about introducing the web configurator for more
information on the RESET button.

21.3 Restart

System restart allows you to reboot the P-660HWP-Dx without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the P-660HWP-Dx reboot. This
does not affect the P-660HWP-Dx's configuration.

Figure 173 Restart Screen

P-660HWP-Dx User's Guide
Chapter 21 Tools
39