ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual page 370

Appendix G Firewall Commands
Table 168 Firewall Commands (continued)
FUNCTION
Edit
E-mail
Attack
36
COMMAND
config edit firewall e-mail
mail-server <ip address of
mail server>
config edit firewall e-mail
return-addr <e-mail address>
config edit firewall e-mail
email-to <e-mail address>
config edit firewall e-mail
policy <full | hourly | daily
| weekly>
config edit firewall e-mail
day <sunday | monday | tuesday
| wednesday | thursday |
friday | saturday>
config edit firewall e-mail
hour <0-23>
config edit firewall e-mail
minute <0-59>
config edit firewall attack
send-alert <yes | no>
config edit firewall attack
block <yes | no>
config edit firewall attack
block-minute <0-255>
DESCRIPTION
This command sets the IP address to which
the e-mail messages are sent.
This command sets the source e-mail
address of the firewall e-mails.
This command sets the e-mail address to
which the firewall e-mails are sent.
This command sets how frequently the
firewall log is sent via e-mail.
This command sets the day on which the
current firewall log is sent through e-mail if the
P-660HWP-Dx is set to send it on a weekly
basis.
This command sets the hour when the firewall
log is sent through e- mail if the P-660HWP-
Dx is set to send it on an hourly, daily or
weekly basis.
This command sets the minute of the hour for
the firewall log to be sent via e- mail if the P-
660HWP-Dx is set to send it on a hourly, daily
or weekly basis.
This command enables or disables the
immediate sending of DOS attack notification
e-mail messages.
Set this command to yes to block new traffic
after the tcp-max-incomplete threshold is
exceeded. Set it to no to delete the oldest
half-open session when traffic exceeds the
tcp-max-incomplete threshold.
This command sets the number of minutes for
new sessions to be blocked when the tcp-
max-incomplete threshold is reached. This
command is only valid when block is set to
yes.
P-660HWP-Dx User's Guide