ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual page 48

Chapter 2 Introducing the Web Configurator
Table 3 Web Configurator Screens Summary (continued)
LINK/ICON
NAT
Security
Firewall
Content Filter
Certificates
Advanced
Static Route
Bandwidth
MGMT
Dynamic DNS
Remote MGMT
UPnP
40
SUB-LINK FUNCTION
General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the P-660HWP-
Dx.
General Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rules This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Keyword Use this screen to block sites containing certain keywords in
the URL.
Schedule Use this screen to set the days and times for the P-660HWP-
Dx to perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your P-660HWP-Dx.
My Certificates
Trusted CA's
Trusted Remote
Hosts
Directory Servers
Static Route Use this screen to configure IP static routes.
Summary Use this screen to enable bandwidth management on an
interface.
Rule Setup Use this screen to define a bandwidth rule.
Monitor Use this screen to view the P-660HWP-Dx's bandwidth usage
and allotments.
Dynamic DNS Use this screen to set up dynamic DNS.
WWW Use this screen to configure through which interface(s) and
from which IP address(es) users can use HTTPS or HTTP to
manage the P-660HWP-Dx.
Telnet Use this screen to configure through which interface(s) and
from which IP address(es) users can use Telnet to manage the
P-660HWP-Dx.
FTP Use this screen to configure through which interface(s) and
from which IP address(es) users can use FTP to access the P-
660HWP-Dx.
SNMP Use this screen to configure your P-660HWP-Dx's settings for
Simple Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and
from which IP address(es) users can send DNS queries to the
P-660HWP-Dx.
ICMP Use this screen to change your anti-probing settings.
General Use this screen to enable UPnP on the P-660HWP-Dx.
P-660HWP-Dx User's Guide