Using Configuration Files; Figure 46 Red Hat 9.0: Kde: Network Configuration: Dns; Figure 47 Red Hat 9.0: Kde: Network Configuration: Activate - ZyXEL Communications P-971M User Manual

Zyxel communications cable modem user's guide
Hide thumbs Also See for P-971M:
Table of Contents

Advertisement

P-660H/HW/W-T Series User' Guide
• If you have a dynamic IP address click Automatically obtain IP address settings
with and select dhcp from the drop down list.
• If you have a static IP address click Statically set IP Addresses and fill in the
Address, Subnet mask, and Default Gateway Address fields.
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.

Figure 46 Red Hat 9.0: KDE: Network Configuration: DNS

5 Click the Devices tab.
6 Click the Activate button to apply the changes. The following screen displays. Click Yes
to save the changes in all screens.

Figure 47 Red Hat 9.0: KDE: Network Configuration: Activate

7 After the network card restart process is complete, make sure the Status is Active in the
Network Configuration screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your computer IP
address.
79
Appendix B

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-971m - v3.70.01

Table of Contents