Related Manuals for ZyXEL Communications PK5000Z
Summary of Contents for ZyXEL Communications PK5000Z
-
Page 1: Quick Start Guide
PK5000Z 802.11g W ireless ADSL2+ 4-port Gateway Quick Start Guide Version 3.40 12/2009 Edition 1... - Page 2 Overview The PK5000Z is a wireless ADSL router with a four-port built-in switch. This Quick Start Guide shows you how to use the PK5000Z to connect to the Internet and how to configure the device settings to connect wirelessly. See your User’s Guide for background information on all features.
-
Page 3: Hardware Connections
Use this section to have your PK5000Z automatically detect and set up your Internet connection. 1 Open your web browser to a website. Wait while your PK5000Z tries to detect your DSL connection to your ISP. This may take a few minutes. - Page 4 PK5000Z Quick Start Guide 1 Select Active and click Next to continue. It is strongly recommended that Enable OTIST is NOT selected. See section 7 for more information. 2 Configure your wireless settings in the screen. Click Next. 3) If you select either WEP or WPA-PSK security (recommended), then follow the directions to enter the appropriate key.
-
Page 5: Troubleshooting
DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP address directly. If you want to access the PK5000Z again, you need to use a static IP address in the sam e subnet as your PK5000Z (the PK5000Z’s default IP address is http://192.168.0.1). -
Page 6: Customer Information
If you do not, go to the next step. B) On a computer connected to the PK5000Z, make sure your PK5000Z and the computers on your wireless network are using the same wireless and wireless security settings. See the chapter on Wireless LAN in the User’s Guide for more information. - Page 7 PK5000Z Quick Start Guide 8 If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable alarm equipment, consult your telephone company or a qualified installer. Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent.
- Page 8 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the PK5000Z and is the answer not in the manual?
Questions and answers