Table of Contents
Advertisement
P-971M User's Guide
Figure 8 CLI: Login Screen
ZyXEL Corporation Embedded Telnet Server (c) 2000-2003
WARNING:
login: admin
password:
WARNING:
Console now switched to Telnet session...
CM>
5.1.2 Command Syntax Conventions
The system uses a one-level command structure. You must type the full command every time,
as follows.
For instance, the following example displays the time (in milliseconds) since the Prestige was
last restarted.
The conventions for typing in most CI commands are shown next.
• The command keywords are in
• Commands are case-sensitive. Thus
• Commands can be abbreviated to the smallest unique string that differentiates the
command. For example the
• You may enter a unique part of a command and press
automatically display the full command. For example, if you enter
full command of
• The required fields in a command are enclosed in angle brackets
• The range or length of the required field input is enclosed in curly brackets
• The optional fields in a command are enclosed in square brackets
• The |symbol means or.
• Numbers are delimited by one of a space, comma, or semicolon (for example,
A range is delimited by a dash (for example,
that goes to the maximum allowed (for example,
using all delimiters (for example,
41
Access allowed by authorized users only.
It is possible to crash the system, cause a deadlock,
or cause the connection to be shut down via Telnet.
Run commands with caution!
CM> <command>
CM> system_time
command [(#)] [parms...]
courier new
help
automatically displays.
help
font.
is not the same as
-i
command could be abbreviated to
[TAB]
). You can specify an open-ended range
0-3
). You can specify a range of values
3-
).
0 - 3,5,7-
.
-I
.
he
to have the Prestige
and press
he
[TAB]
.
<>
.
{}
.
[]
0,1;2 3
Chapter 5 Introduction to CLI
, the
).
Advertisement
Table of Contents
