Changing The Program Mid-Cycle; Forgot To Add A Dish; Cutlery Rack - Scandomestic SFO 4102 W User Manual

Hide thumbs Also See for SFO 4102 W:
Table of Contents

Advertisement

Available languages

Available languages

Changing the Program Mid-Cycle

Premise:
A cycle that is underway can only be modified if it has only been running
for a short time. Otherwise, the detergent may have already been re-
leased, and the appliance may have already drained the wash water. If
this is the case, the detergent dispenser must be refilled (see the section
entitled " Loading the Detergent").
Open the door ,touch the Program button more than 3 seconds, the ma-
chine will be in standby state, then you can change the program to the
desired cycle setting (see the section entitled " Starting a wash cycle").
Note:
If you open the door during a wash cycle, the machine will pause. The
program light will stop blinking and the buzzer will mooing every minute
unless you close the door. After you close the door, the machine will
keep on working again.

Forgot to add a dish

A forgotten dish can be added any time before the detergent cup opens
1
Open the door a little.
2
After the spray arms stop working, you can open the door com-
pletely.
3
Add forgotten dishes.
4
Close the door
5
The dishwasher will start running again.
At the end of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will
sound for 8 seconds, then stop. Turn off the appliance using the ON/OFF
button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid han-
dling the dishes and utensils while they are still hot and more susceptible
to break. They will also dry better.
Switching Off the Dishwasher
The program light is on but is not blinking, only in this case has the pro-
gram ended.
Open the door.Switch off the dishwasher by pressing the ON/OFF but-
ton. 2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to shocks. The dishes should cool down for
around 15 minutes before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before
removing the dishes. In this way they will be colder and the drying will
be improved.
Unloading the dishwasher
It is normal for the dishwasher to be wet inside.
Empty the lower basket first and then the upper one. This will avoid wa-
ter dripping from the upper Basket onto the dishes in the lower one.
Warning: It is dangerous to open the door mid-cy-
cle, as hot steam may scald you.
Loading the baskets according to
EN50242
1
Cups
2
Saucers
3
Glasses
4
Small serving bowl
5
Medium serving bowl
6
Large serving bowl
7
Dessert plates
8
Dinner plates
9
Soup plates
10 Oval platter

Cutlery rack

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfo 4102 x

Table of Contents