Starting A Cycle Wash; Changing The Program Mid-Cycle; Technical Information - Scandomestic SFO 2204 B User Manual

Some element of dishwasher leaks .
WARNING
If overflow occurs, turn off the main water supply before calling
a service.
If there is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the dish-
washer.

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and
push them back.
It is commended to load the lower basket first, then the up-
per one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to
last page "Product fiche".
Make sure that the water supply is turned on to full pres-
sure.
4. Close the door, press the Power button, to switch on the
machine.
5. Choose a program, the response light will turn on. Then
press the Start/Pause button, the dishwasher will start its
cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a
short time otherwise, the detergent may have already been re-
leased and the dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs to be reset and
the detergent dispenser must be refilled. To reset the dishwash-
er, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds - the pro-
gram will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dish-
washer will start.
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent
dispenser opens. If this is the case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dish-
washer will start.
WARNING
It is dangerous to open the door mid-cycle, as hot steam may
scald you.

TECHNICAL INFORMATION

Height (H) ............................................................................ 438mm
Width (W) ............................................................................ 550mm
Depth (with the door closed) .............................................. 500mm
Depth (with the door opened 90°) ...................................... 812mm
24