Technical Specifications - Flex CHE 5-40 SDS-max Operating Instructions Manual

CHE 5-40 SDS-max
NOTE!
The vibration emission level given in this infor-
mation sheet has been measured in accor-
dance with a standardised test given in
EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different appli-
cations, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load the
times should also be considered during which
the power tool is switched off or even running,
but not actually in use. This may significantly
decrease the exposure level over the total
working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).

Technical specifications

Hammer drill and
chisel hammer
Rated power
Idle speed
Impact number
at no load
Max. single impact
energy (according to
"EPTA-procedure
05/2009")
Lubrication
Tool holder
Max. drill diameter
– Concrete
– Masonry
(HM drill bit)
Weight according
to "EPTA-procedure
01/2003"
Protection class
CHE 5-40
SDS-max
W 1150
380
min
-1
min 2900
-1
J 10
Grease
SDS-max
mm 40
mm 90
kg 6.4
II /
13