Disposal Information; Declaration Of Conformity; Exemption From Liability; Warning - Flex CHE 5-40 SDS-max Operating Instructions Manual

Gears
NOTE!
Do not loosen the screws on the gear head
during the warranty period.
Non-compliance will deem the guarantee
obligations of the manufacturer null and
void.
The electric power tool has an grease lubri-
cation. Have the grease changed/topped up
by a customer service workshop authorised
by the manufacturer.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
X attachmnent cord
If the supply cord of this power tool is
damaged, it must be replaced by a specially
prepared cord available through the FLEX
service organization.
Spare parts and accessories
Other accessories, in particular insertion
tools, can be found in the manufacturer's
catalogues.
Exploded drawings and spare-part lists can be
found on our homepage: www.flex-tools.com

Disposal information

WARNING!

Render redundant power tools unusable
by removing the power cord.
EU countries only.
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EG on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
NOTE!
Please ask your dealer about disposal
options!
18

-Declaration of Conformity

We declare under our sole responsibility
that the product described under "Technical
specifications" conforms to the following
standards or normative documents:
EN 60745 in accordance with the regu-
lations of the directives 2014/30/EU,
2006/42/EC, 2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Manager Research &
Development (R & D)
12.02.2018
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused by
the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool or
by use of the power tool with products from
other manufacturers.
CHE 5-40 SDS-max
Klaus Peter Weinper
Head of Quality
Department (QD)