Technical Data; Inserting/Replacing The Battery - Flex DD 2G 18.0-EC LD Operating Instructions Manual

Technical data

Tool
Type
Rated
Vdc 18
voltage
No-load
r.p.m 0-500 / 0-1800
speed
Chuck
mm 1.5-13
capacity
Max. drill
diameter for mm 13
metal
Max. drill
diameter for mm 52
wood
Max. drill
diameter for mm N/A
masonry
Torque, max.
– Soft screw-
driving
Nm
case
– Hard
screw-
Nm
driving
case
Impact rate bpm N/A
Clutch
settings
Weight
according
to"EPTA
Procedure kg
01/2003"
(without
battery)
Battery
Weight of
kg
battery
Working
-10°-40°C
temperature
18
DD 2G 18.0- PD 2G 18.0-
EC LD EC LD
Percussion
Drill Driver
Drill Driver
13
52
13
35
65
0-8000 /
0-28800
24+
18+
+
1.11 1.195
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5 0.4
AP 18.0/5.0 0.7
AP 18.0/8.0 1.1
DD 2G 18.0-EC LD / PD 2G 18.0-EC LD
Storage
< 50℃
temperature
Charging
4~40°C
temperature
Charger CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1. Torque-adjustment ring
2. Keyless chuck
3. Chuck jaws
4. Variable-speed trigger switch
5. LED light
6. Two-speed gear shifter
7. Direction preselector switch (forward/
center-lock/reverse)
8. Soft grip
9. Strap fixing
For attaching a wrist strap (not included)
in order to reduce the chances of
dropping your tool.
10. Function-selection ring
Only for PD 2G 18.0-EC LD
11. Removable belt clip
12. Removable bit bracket
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power tool
Unpack the cordless drill driver/hammer
drill and check that here are no missing or
damaged parts.
NOTE
The batteries are not fully charged on delivery.
Prior to initial operation, charge the batteries
fully. Refer to the charger operating manual.

Inserting/replacing the battery

■ Press the charged battery into the power tool
until it clicks into place (see figure B).