Manufacturer's Address; Attached Illustrations - Vari OP-115 Translation Of The Original Instructions

Table 14: Nameplate - example
2.7

Manufacturer's Address

VARI, a.s.
Opolanská 350
289 07 Libice nad Cidlinou
The Czech Republic
2.8

Attached illustrations

The attached illustrations are common for all language versions. They can be found at the end of this manual in Chapter 4 , page 31.
1 Frame
2a Connecting flange OP-115/145/115R
2b Conecting frame ROP-115
3 Wheel arm
4 Wheel foot
5 Wheel
6 Locking handle
7 Rake belt
Fig. 1: Description of basic parts of the machine
Fig. 2: Machine connection – OP-115/145
Fig. 3: Machine connection – ROP-115
Fig. 4: Drive belt tension – OP-115/145/115R
Fig. 5: Tensioning of the rake belt
Fig. 6: Use of the locking bar on the OP-115R machine
Fig. 7: Safety Pictograms
Location on OP-115, OP-145, OP-115R - inner side of the front cover
22
Phone: (+420) 325 607 111
Fax: (+420) 325 607 264
E-mail: vari@vari.cz
8 Crossbar
9 Rake
10 Strut
11 Pulley
12 Shield
13 Windrow shield
14 Windrow shield holder
15 Tightening element
OP-115 OP-145 OP-115R ROP-115
Field Description
Device type designation OP-115
Type
Unique serial identification number:
№
1005800097.0217.00001 (product.period.order)
Business (order) number: 4493
C№
Device type designation OP-145
Type
Unique serial identification number:
№
1005800098.0217.00001 (product.period.order)
Business (order) number: 4494
C№
Type Device type designation ROP-115
Unique serial identification number:
№
1005900218.0217.00001 (product.period.order)
C№ Business (order) number: 4477
Device type designation OP-115R
Type
Unique serial identification number:
№
1005800258.0620.00001 (product.period.order)
C№ Business (order) number: 4570
http://www.vari.cz
16 Support leg
17 Driving V-belt
18 Drive pulley
19 Drive belt
20 Connecting belt
21 Tensioning pulley of the connecting belt
22 Tensioning pulley belt
23 Drive pulley cover
Location on ROP-115 - drive pulley cover
http://katalognd.vari.cz