Using The Comp Eq Effect; Using The Reverb Effect - Zoom RhythmTrak RT-223 Operation Manual

Using the COMP EQ
effect
This section describes how to use the COMP EQ
effect.
1.
In pattern, song, or groove play
mode, press the [COMP EQ] key
several times, so that the key lights
up.
The RT-223 switches to effect mode, and the
COMP EQ effect becomes ON. The display
changes as follows.
BOTTOM
COMP EQ effect
patch name
2.
Use the VALUE [+]/[-] keys to select
the patch to use.
The new patch is called up immediately.
HINT
• When you select an empty patch, the
indication "EMPTY" appears on the
display. In this case, the sound does not
change.
• If a playable pattern or song is selected in
pattern or song mode, pressing the PLAY
R
[ ] key will start playback of the pattern
or song. This lets you check the sound.
ZOOM RT-223
1
COMP EQ effect
patch number
Using Effects (Effect Mode)
3.
To temporarily bypass the COMP EQ
effect, press the [COMP EQ] key so
that the key goes out.
The COMP EQ effect is turned off, and the
indication "BYPASS" is shown on the display. To
turn the COMP EQ effect back on, press the
[COMP EQ] key once more.
4.
When the COMP EQ effect patch
has been selected, press the [EXIT]
key.
The effect mode is terminated, and the RT-223
returns to the previous mode.

Using the REVERB effect

This section describes how to use the REVERB
effect. For this effect, you first select the patch
and then separately adjust the send level for the
drum kit and bass program.
1.
In pattern, song, or groove play
mode, press the [REVERB] key
several times, so that the key lights
up.
The RT-223 switches to effect mode, and the
REVERB effect becomes ON. The display
changes as follows.
STUDIO
0
REVERB effect patch name
2.
Use the VALUE [+]/[-] keys to select
REVERB effect
patch number
55