Zoom RhythmTrak RT-223 Operation Manual page 23

7.
Press the [FUNCTION] key and then
pad 5 (QUANTIZE).
The current quantize value appears on the display.
QNTIZE
Quantize value
"Quantization" refers to the degree of detail with
which notes are recorded. By setting the quantize
value to the shortest note to use for the pattern,
recording can be carried out while automatically
maintaining precise timing. If you select the finest
quantize setting, you can retain the human touch
that is characterized by slightly irregular timing.
HINT
The [FUNCTION] key is used to make
various settings for the RT-223. For details,
please refer to page 63.
8.
Use the VALUE [+]/[-] keys to set the
quantize value (shortest note to be
recorded).
4 ........Quarter note 24.....Sixteenth triplet note
8 ........Eighth note 32.....Thirty-second note
12 ......Eighth triplet note 48.....Thirty-second triplet note
16 ......Sixteenth note Hi .....1 tick (1/96 of quarter
9.
Press the [FUNCTION] key once
more.
The new quantize value is set and the unit returns
to the pattern mode.
HINT
After recording is completed, it is possible
to change the quantize value and record
again on the same track. After recording
ZOOM RT-223
16
note)
Entering Patterns in Real Time
bass drum and snare drum using quarter
notes, you can record a hi-hat sequence
with sixteenth notes.
10.
While holding down the REC [
key, press the PLAY [
001-04
Measure Beat
O
The REC [ ] key and PLAY [
and the [TEMPO] key flashes according to the
currently selected tempo. The metronome sound
starts.
HINT
When you call up an empty pattern, it will
be set to the same beat and number of
measures as the previous pattern. These
settings can be changed, as described on
pages 64, 65.
11.
Tap the pads in accordance with the
metronome sound.
Pad
The sound of the respective pad is heard, and it is
recorded for the duration set with the quantize
value. When the end of the pattern is reached, the
recording loops back to the beginning and
continues, allowing you to add to the recording as
often as desired. You can check the current
position in the pattern on the display (measure/
beat).
HINT
• By using the [BANK] key during input of a
pattern, you can switch the set of drum
sounds assigned to the pads.
• When the REC [O] key is pressed during
O
]
R
] key.
500
R
] key light up,
23