Assigning A Name To A Drum Kit - Zoom RhythmTrak RT-223 Operation Manual

Assigning a name to a
drum kit
To give a name to a drum kit or change an
existing name, proceed as follows.
1.
Press the [PATTERN] key.
The [PATTERN] key lights up and the RT-223
goes into pattern mode.
2.
Press the [DRUM] key and then the
[KIT/PROG] key.
The screen for selecting a drum kit appears.
BASIC
3.
Use the VALUE [+]/[-] keys to select
the drum kit whose name you want
to edit.
A menu for making individual pad settings
appears.
4.
Use the cursor left/right keys to
bring up the indication "KITNAME"
on the display.
After a while, the current drum kit name appears.
The currently selected character of the drum kit
name flashes.
BASIC
HINT
The "KITNAME" parameter applies to all
pads.
ZOOM RT-223
5.
For information on available characters, see page
33.
6.
7.
The new name is accepted, and the drum kit select
screen appears again.
To return to pattern mode, press the [PATTERN]
key.
0
0
Various Drum Kit Functions (Kit Mode)
Use the cursor left/right keys to
move the cursor position, and use
the VALUE [+]/[-] keys to select the
character.
Repeat step 5 until the name is
complete.
When name input is completed,
press the [EXIT] key.
53