Editing A Song; Copying A Range Of Measures - Zoom RhythmTrak RT-223 Operation Manual

This section describes how you can edit a song that you have created.

Copying a range of measures

Part of a song specified as a range of measures
can be copied to another location. This is useful to
have a certain passage play repeatedly.
Copy
1 2 3 4 5
PATTERN A PATTERN A PATTERN A
1 2 3 4 5
PATTERN A PATTERN B PATTERN A PATTERN A
Copy
1 2 3 4
PATTERN A PATTERN B
1 2 3 4 5
PATTERN A PATTERN B PATTERN A PATTERN B
1.
Press the [SONG] key.
The RT-223 goes into song mode, and the song
selection screen appears.
2.
Use the VALUE [+]/[-] keys to select
the song to edit.
ZOOM RT-223

Editing a Song

6 7 8
PATTERN B
6 7 8 9 10
PATTERN B
6 7 8
3.
O
Press the REC [
The key lights up and song step input becomes
possible.
4.
Press the [EDIT] key while holding
down the [INSERT/COPY] key.
The display changes as follows. On this screen,
you can specify the copy start point measure.
123-01
First measure of range to copy
5.
Use the VALUE [+]/[-] keys to select
the measure to be used as start
point of the range to copy. Then
press the [INSERT/COPY] key.
The display changes as follows. On this screen,
you can specify the copy end point measure.
124-01
Last measure of range to copy
6.
Use the VALUE [+]/[-] keys to select
] key.
STR
END
45