Intended Use; Non-Intended Use; Technical Data - Leister TWINNY T7 Operating Instructions Manual

1.1 Intended use

TWINNY T7/T5 is intended for lap welding and the assembly of films and sealing sheets. The maximum overlap
width is 125 mm. The maximum welding seam width is 50 mm.
Only use original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invali-
dated.
Material types and thicknesses
Material
PE-HD, PP
PVC-P, PE-LD, TPO, FPO
Additional materials upon request.

1.2 Non-intended use

Any other use or any use beyond the type of use described is deemed non-intended use.

2. Technical data

Nominal voltage*
Nominal output
Frequency
Temperature
Air volume
Drive
Max. welding force
Emission level
Dimensions (L × W × H)
Weight
Conformity marking
Protection class I
* Connection voltage cannot be switched
Subject to change without prior notice.
TWINNY T7
230 V
V~
230
W 3400
Hz
°C
°F
%
m/min
ft./min
N/lbf
L pA (dB)
mm
inch
kg / lbs
10.5 / 23.1
Material thickness reference value
0.3 mm – 2.5 mm
0.3 mm – 3.0 mm
TWINNY T5
230 V
230
3400
50 / 60
100 – 560
212 – 1040
45 – 100
0.8 – 8
2.6 – 26.2
1000 / 225
73 (K = 3 dB)
350 × 360 × 260
13.8 × 14.2 × 10.2
TWINNY T5
120 V
120
1800
9.5 / 21
39