Setup: How Do I Setup My Clock; Where To I Place My Clock; How Do I Manually Set The Time - La Crosse Technology BBB84022 Faqs

1. Install batteries into your clock.
2. Set time & Date
Your clock is designed for flexible placement on a desk or countertop, or to position on the wall.
• Mount your clock near an exterior wall with the front or back facing toward Ft. Collin
Colorado for best WWVB reception.
• Electrical wires, utilities, cables, etc. may create interference if too close.
1. Hold the SET button 3 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values, hold to adjust quickly.
3. Press the SET button to confirm adjustments and move to the next item.
4. Press the SNOOZE button at any time to exit.
Settings menu order:
Language (English, Español, Francais)
⋅
Beep ON/OFF
⋅
Atomic ON/OFF
⋅
DST ON/OFF
⋅
Time Zone
⋅
Hour
⋅
Minutes
⋅
Year
⋅
Month
⋅
Date
⋅
Fahrenheit/Celsius
⋅
1. Hold the SET button 3 seconds to enter settings mode. ENGLISH will flash.
2. Use the + or – button to change language. Press the SET button to confirm and move to
next item.
3. BEEP ON will flash. Use the + or – button to turn Beep sound off. Press the SET button to
confirm and move to next item.
4. ATOMIC ON will flash. Use the + or – button to turn off if you do not want atomic time
signal. Press the SET button to confirm and move to next item.
5. DST ON will flash. Use the + or – button to turn off if you do not observe Day Light Saving
Time. Press the SET button to confirm and move to next item.
6. ZONE EST will flash. Use the + or – button to select your time zone. Press the SET button
to confirm and move to next item.
7. HOUR will flash. Use the + or – button to adjust. Press the SET button to confirm and
move to next item.

SETUP: HOW DO I SETUP MY CLOCK?

WHERE TO I PLACE MY CLOCK?

HOW DO I MANUALLY SET THE TIME?

2 | P a g e