Power Up 1. Insert 2-AA batteries into your Outdoor Sensor. 2. Insert 3-AA batteries Into your Atomic Clock. 3. Enter the Settings Menu to adjust yoour time and date. 4. Once the sensor is reading to your clock, place the senor outside in a shaded location.
Settings Menu 1. Hold the button to enter the Settings Menu. 2. Use the buttons to adjust values. 3. Press to confirm values. 4. Press the SNOOZE button at any time to save and exit. Settings Menu Order: • Beep ON/OFF •...
Custom Display Press the MOON button to switch between Calendar or Moon Phase. Your clock will stay on the selection. Moon Phase • Phase / Clock Reads Phase / Clock Reads Phase / Clock Reads The moon phase is based on WANING GIBB NEW MOON WAXING GIBB...
Time Alarm Set Alarm: 1. Hold the ALARM button to enter Alarm Settings. 2. Use the buttons to adjust values. 3. Press the ALARM button to confirm and move to next item. Silence a sounding alarm: Press any button except SNOOZE to silence the alarm for 24 hours.
HI/LO Temperature Records View: Press the + button to view Outdoor, then Indoor Temperature HI and LO Records with time and date stamps. Reset: While viewing individual records, hold the button to reset to current temperatures. Temperature Trend Arrows Both the Indoor and Outdoor temperature have Trend Arrows to indicate temperature changes (2°F / 1°C) over the past one hour period.
Search for Outdoor Temperature If you are seeing NO or dashes for your outdoor readings, please try the following steps: 1. Hold the button to search for your outdoor sensor. The Reception Indicator will begin to animate. 2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and clock.
32°F to 122°F (0°C to 50°C) Power Requirements: 3-AA, IEC, LR6 batteries (not included) Dimensions: Follow La Crosse Technology on YouTube, 12.19” W x 1.59” D x 11.80” H Twitter, Facebook and Instgram. (30.96 W x 4.04 D x 29.98 H cm)
Page 9
Warranty Info FCC Statment This equipment has been tested and found to comply with La Crosse Technology, Ltd. provides a 1-year the limits for a Class B digital device, pursuant to part 15 limited time warranty (from date of purchase) on of the FCC Rules.