La Crosse Technology 513-1419BL-WA - Atomic Large Full Digital Calendar Clock Manual
![]()
LCD Features
![La Crosse Technology - 513-1419BL-WA - LCD Features LCD Features]()
Atomic Time Reception Icon
Low Battery Icon
Snooze Icon Zz
Alarm Active Icon (bell)
Custom Display Modes
![La Crosse Technology - 513-1419BL-WA - Custom Display Modes Custom Display Modes]()
- Press and release the MODE button to customize how the top and right sections of the clock are displayed.
- The clock will stay in the mode selected.
Setup
![La Crosse Technology - 513-1419BL-WA - Setup Setup]()
- Insert the 5.0 volt AC adapter into the outlet then into the clock.
- (Optional) Insert 2 "AA" batteries into the clock according to polarity markings.
- Manually Set Time/Date.
Note: The clock will search for atomic time 2 hours after batteries are installed. The backlight will be out briefly during the search.
Atomic Time Signal
- This clock while plugged in, may take up to 3 days to get the signal.
- The clock will automatically search at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
- If there is no WWVB reception, the clock will search for the atomic time signal every 2 hours until the WWVB time is received.
- After reception, this clock will only search for the atomic signal after midnight.
- To perform a manual search for the atomic time signal, hold the MINUS button for 3 seconds. The atomic time icon will flash.
- For information about WWVB atomic time signal visit: www.nist.gov/pml/div688/grp40/wwvb.cfm
Settings: Language, Time, Date, etc.
- Hold the MODE button to enter time set mode.
- Press the + or - buttons to adjust the values.
- Press the MODE button to confirm adjustments and move to the next item.
- Press the SNOOZE button at any time to exit.
Settings mode order:
- Language (English or Spanish)
- Beep ON/OFF
- Atomic ON/OFF
- Time Zone
- DST ON/OFF
- 12/24 Hour
- Hour
- Minutes
- Year
- Month
- Date
- Fahrenheit/Celsius
- Hold the MODE button for 3 seconds to enter settings mode. ENGLISH will show. Use the +/- button if you wish to select ESPAÑOL (Spanish).
![La Crosse Technology - 513-1419BL-WA - Settings - Step 1 Settings - Step 1]()
- Press the MODE button to move to BEEP ON/OFF. Use the +/- button to turn off the beep sound.
- Press the MODE button to select atomic time signal ON/OFF.
Use the +/- button if you do not want atomic time reception.
![La Crosse Technology - 513-1419BL-WA - Settings - Step 2 Settings - Step 2]()
Note: If you choose OFF for atomic time, the clock will skip time zone and DST setting and jump to 12/24 hour time.
- Press the MODE button to select your time zone. Use the +/- button to adjust.
- Press the MODE button to select daylight saving time ON/OFF. If you do not observe DST, use the +/- button to turn off the Daylight Saving Time Indicator.
![La Crosse Technology - 513-1419BL-WA - Settings - Step 3 Settings - Step 3]()
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
- Press the MODE button to select 12 hour or 24 hour time format. Use the +/- button to adjust.
- Press the MODE button to set the Hour. Press the +/- button to adjust.
- Press the MODE button to set the Minutes.
Press the +/- button to adjust. Hold to adjust quickly.
![La Crosse Technology - 513-1419BL-WA - Settings - Step 4 Settings - Step 4]()
- Press the MODE button to set the Year. Press the +/- button to adjust.
- Press the MODE button to set then set the Month
Press the +/- button to adjust. Hold to adjust quickly. - Press the MODE button to set the Date.
Press the +/- button to adjust. Hold to adjust quickly. - Press the MODE button to select Fahrenheit or Celsius temperature display. Press the +/- button to adjust.
![La Crosse Technology - 513-1419BL-WA - Settings - Step 5 Settings - Step 5]()
- Press the MODE button to confirm and exit.
Note: Press the SNOOZE button at any time to exit settings.
Set Time Alarm
![La Crosse Technology - 513-1419BL-WA - Set Time Alarm Set Time Alarm]()
- Hold the ALARM button to enter alarm settings. "AL" will show.
- The Alarm Hour will flash. Press the +/- button to adjust.
- Press the ALARM button to set the Minutes.
- The Alarm Minutes will flash. Press the +/- button to adjust.
Hold to adjust quickly. - Press the ALARM button to confirm and exit.
Activate/Deactivate Alarm
- Hold the ALARM button to enter alarm settings. "AL" will show.
- Press and release ALARM to activate/deactivate the alarm.
- The bell icon will show when active.
Snooze
- When alarm sounds press the SNOOZE button to silence the alarm for 10 minutes.
- The alarm bell icon will show and Zz will flash.
- Press any button except SNOOZE to stop the alarm for 1 day.
Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes and then shuts off completely.
Backlight: HI-LOW-OFF
- When operating with the AC adapter, the backlight is adjustable: (HI-LOW-OFF).
- Press and release the SNOOZE/LIGHT HI-LOW-OFF button to adjust backlight.
- When operating on batteries only, the backlight will come on briefly when the SNOOZE button is pressed.
Low Battery Icon
![]()
- The low battery icon will appear between the hour and minutes.
- This icon indicates it is time to replace the batteries.
![]()
Latest video content http://bit.ly/LaxTech_YouTube
![]()
For personalized interaction, http://bit.ly/LaxTech_Facebook
![]()
Join the conversation http://bit.ly/LaxTech__Twitter
![]()
Pin and share http://bit.ly/LaxTech_Pinterest
Care and Maintenance
- Do not mix old and new batteries.
- Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
- Always purchase the correct size and grade of battery suitable for intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed with correct polarity (+ and - ).
- Remove batteries from equipment which is not to be used for an extended period
- Remove expired batteries promptly.
Warranty and Support
Before returning a product, please contact our friendly customer support with questions or visit our online help:
Phone: 1-608-782-1610
Online Product Support and Registration: www.lacrossetechnology.com/support
View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf
Specifications
Indoor |
Temperature Range Update Interval | 32°F to 99°F (0°C to 37°C) About every 60 seconds |
Power |
Clock | AC6 GPU280500150WA00 5 volt (Primary) Optional: 2-AA, IEC, LR6 batteries (not included) |
Battery Life |
Clock | over 24 months when using reputable brands |
Dimensions |
Clock | 9.84" W x 7.48" H x 1.14" D (250 x 190 x 29 mm) |
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download La Crosse Technology 513-1419BL-WA - Atomic Large Full Digital Calendar Clock Manual
Need help?
Do you have a question about the 513-1419BL-WA and is the answer not in the manual?
Questions and answers