Advertisement
1. Insert 6 "AA" batteries into your clock.
2. Enter Basic Settings.
IMPORTANT: Only press or hold one button at a time.
1. Hold the
button 2 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the
button to confirm adjustments and move to the next item.
5. Press the F/C button at any time to exit.
Settings order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC/ DST OFF / DST ON
• Time Zone
• 12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
Notes:
• The language selected in this menu will adjust the Weekday readout and menu items.
• If "Atomic OFF: is selected, menu will skip DST and Time Zone settings and move straight to
the 12/24 Hour Format setting.
• Weekday sets automatically when Year, Month and Date are set..
Settings Menu
1. Hold the
button for 2 seconds to enter setting mode. ENGLISH will show. Press the + or -
button to change to another language (Español, or Français or Deutsch). Press the
to select Beep ON/OFF.
2. BEEP ON will show. Press the + or – button to turn beep sound OFF. Press the
move to Atomic Time ON/OFF.
3. Press
to confirm and move to the atomic time ON/OFF. ATOMIC ON will show. ON
flashes. Use the + or - button if you do not want Atomic Time signal (OFF).
SETUP: HOW DO I SETUP MY CLOCK?
HOW DO I MANUALLY SET THE TIME?
button
button to
2 |
P a g e
Advertisement
