Advertisement
MilkyWay
6: Connecting to power supply / 41
6: Connecting to power supply
Power supply
MilkyWay rail systems can be powered in many different ways, see 1.5: Power supply.
6.1: End point charging/ in-rail charging
One type of charger is available. Use the charger supplied with the lift unit and read the user manual.
6.2: Connecting the conductor rails
The terminals must be fitted to the end of
the conductor rails as shown in the figure.
Cut the conductor to fit the terminal.
Distances (a) and (b) must be observed.
6.3: Conducting cables
Upper trail
In systems induding switches, the cables for the cross-rail must be conducted
along the rail. It can be concealed in the upper trail of the rail.
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
Advertisement
