Advertisement
MilkyWay
3: Basic rail systems / 17
3: Basic rail systems
3.1: Installation of rails
Basic rail systems are normally installed on the ceilling or on the walls, see 1.4: Installation methods.
MilkyWay Rail
NB! For basic rail systems connected to (x-y)/traverse systems, see 4.4.4: Heights, systems with transition gates.
3.2: Connecting rails and rail curves
Two or more straight rails and/or rail curves can be connected to each other to create a rail featuring the required
lenght and direction. Joint bracket provides a convenient solution for secure connection, see 10.4: Installation
equipment.
Joint bracket, 50400316
When installing shorter rail systems, the rail system can, to an advantage, be assembled on the floor. Thereafter, the
rail system is lifted up to the ceiling as one unit. The conductor rails for power supply can be inserted in full length in
the pre-assembled rail system.
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
Advertisement
