Control From The Front Panel; Displaying Setting Values On The Monitor - Olympus OEP-5 Instructions Manual

Connected
Instrument
EU-M30S
EU-M60
EU-C60
IMH-20,
IMH-10
UCES-3
UCES-2
4
38

4.2 Control From the Front Panel

Description in instructions
Section 6.9, "Recording" "Image
recording using OEP"
Section 6.13, "Operation of ancillary
equipment (printer, VTR, etc.)"
"Image recording using the color video
printer"
Section 6.8, "Recording"
"Image recording using the video printer"
Section 5.7, "Recorded data operations"
"Printing"
You cannot control from the connected
equipment.
Section 5.6, "Operating the ancillary
equipment screen" "Operating the
connected equipment" "Operating the
printer"
4.2 Control From the
Front Panel
NOTE
To check the setup values on the monitor, connect the
video output signal from this instrument to the monitor
in advance.
Displaying Setting Values on the
Monitor
The setting value of this instrument can be displayed on
the monitor.
1
Press the "DISPLAY" button.
Each press of the "DISPLAY" button displays and
hides the setting value (print quantity, memory
page, operation mode, source/memory) of this
instrument alternately (see Figure 4.1).
DISPLAY button
Figure 4.1
NOTE
The setup display can also be controlled in the menu.
The setup made using the above procedure is also
applied to the setup using the menu. For details on
menus, see "Setting "DISPLAY"" on page 62.