Control Key Select Flow - GRAUPNER ULTRA DUO PLUS 50 Operating Manual

0-3. CONTROL KEY SELECT FLOW

Two LCD screens, but key control is possible for only one output.
The LCD where key control is possible is indicated by LED which flashes or is on.
In setting status, if ESC button is pressed, it directly moves to a higher menu.
In operating status, if the ESC button is pressed, operating should stop.
If OUTPUT SELECT button is pressed, OUTPUT-LED should be changed.
The OUTPUT LED is automatically changed in the following conditions.
When error occurs
When operation is finished,
The function of the selected output LED.
LED should flash every one second indicating the menu status.
The LED should be ON during operating.
If OUTPUT2 is now selected, and if error occurs in OUTPUT1, the output
should be automatically changed to OUTPUT1.
If OUTPUT2 is now selected, and if operation is finished in OUTPUT1, the
output should be automatically changed to OUTPUT1.
Page 16/53