Control Buttons; Menu Profile - GRAUPNER POLARON EX-1400 Operating Instructions Manual

Control buttons

ESC button
DEC button
INC button
ENTER but-
ton
CPY
CPY button
Push button
on the front

Menu PROFILE

In the "PROFILE" menu you store the data of your batteries and complement them with the re-
spective charge/discharge parameters in the "CHARGE" and "DISCHARGE" menus. The data on
the currently active charge channel (CH1 / CH2) are displayed by default for the last battery mem-
ory selected after opening this menu.
To change this selection, you have to tap on the upper "memory location" fi eld with your fi nger or
with the supplied pen placed in the side of the device. Choose the desired memory location 0 ... 19
in the blue area via the INC / DEC buttons at the bottom of the display. Tapping again the fi eld
deactivates the choice.
"Upper" Settings
PROFILE 10:49:30
AM Field
01 BATTERY NAME
01 "BATTERY
Type NiMH
NAME"
Voltage 01s 1.2V
Type
Capacity 4600 mAh
Volt (Voltage)
01 BATTERY NAME
Type NiMH
Capac. (Capacity)
Voltage 01s 1.2V
Capacity 4600 mAh
CPY
CH1 CH2
Press this button to confi rm the current setting and disables the active set-
ting page. In addition, press this button to return to the previous page and
changed data is stored.
Press this button to change if necessary one page down or reduce setting
values in the selected fi elds.
Press this button to change if necessary one page up or increase setting
values in the selected fi elds.
Press this button to change if necessary to the nearest side of the display;
start a process or store the entered data.
Press this button to copy values or settings.
1. With a press of this button changes between CH1 and CH2.
2. Press and hold during power up:
Recall the <Factory Default>, see page 45
Description
Number and name of the selected memory location
Battery type (NiCd, NiMH, LiIo, LiPo, LiFe, Pb)
Cell number from type and cell voltage resulting from bat-
tery voltage
Battery capacity
INNOVATION & TECHNOLOGIE
17