8. Cleaning and Maintenance Instructions
Maintenance
Attention! Careful and regular maintenance of UFO Infrared Heater considering our instructions assume
great importance so as to attain a long and efficient operation of your appliance.
1- Check the filthiness of the Reflector and IR – Filament at least once a month. If necessary, apply cleaning
and maintenance instructions.
2- The number of checks may be increased considering the amount of the dust in the environment.
3- Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In case
of any deformation, consult to your technical service.
4- Check the Power Cord and Plug visually while cleaning the appliance. In case of any deformation,
consult to your technical service.
5- It is recommended to change the Reflector every 2 years for the purposes of more efficient operation
of your appliance.
Cleaning
Attention! Regular and careful cleaning helps your UFO Heater operate for longer years and more
efficiently.
1- Unplug your power cord for your safety before cleaning your appliance.
2- Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
3- Make sure that the power is off for your safety. Power cord plug must be unplugged.
4- The Reflector and Filament must be cleaned with a soft cloth, a smooth brush or cool or dry air. The
cloth may be damp but never too wet and the cleaner should not include any chemical.
5- Refrain from using cleaning materials likely to damage the Reflector (cleanser etc.).
6- Insert the wire grid using a slotted screwdriver.
UFO User Manual & Certificate Of Warranty
17