Operation Of The Remote Control - UFO -L/12 User Manual

6.2.3 Operation of the Remote Control

Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your Remote Control.
The screen of the remote control starts functioning after inserting the batteries. UFO logo and
flashing clock indicator starts appearing on the screen.
Power mode indicator (mode1) starts functioning after pressing On / Off button.
UFO User Manual & Certificate Of Warranty
12
1- Flip the backside of your remote control and pull out battery
cover. Insert the batteries in accordance with the instructions and
polarity of the batteries.
2- Change the batteries in the same way depicted above.
NOTICE:
1- Replace the old batteries with the same type batteries.
Otherwise, your heater may not function well.
2- Pull out the batteries in case of long terms of disuse
to prevent leakage which may impair your remote
control.